downloads
Data Sheet Size: (777.75 KB)
HA Life Sciences Series Mini Pressure Transmitter
Anderson Life Sciences Mini Pressure Transmitter with Autoclaveable Version
Anderson's HA "Mini" sanitary pressure transmitter is specifically designed for critical measurements in fractional size lines. The product can be ordered with 3/4", 1",or 1-1/2" Tri-Clamp® connections as well as our CPM fitting. This eliminates the need for reducers or adapters, thus reducing hold-up volumes in small lines. Internal zero and span adjustments and easily accessible test points greatly simplify calibration and validation. 316 "L" stainless steel wetted parts are electro-polished to an Ra=8. Finally, since it's an Anderson "Life Sciences Series" product, every transmitter includes a calibration certificate and permanent tag at no charge.
Specifications
- ± 0.5% of full scale
- ± 0.3% of full scale
- Designed and manufactured to sound engineering practices in accordance with Article 3.3 of the PED 97/23/EC; NEMA 4X; IP66; CSA B51-03; CRN# CSA0F9754.5C (except Mini CPM fitting 161)
- 200 uSec
- -1°C to 149°C (30°F to 300°F) (Horizontal Mount recommended over 135°C (275°F))
- 16 AWG max; Screw Terminal; Accessible via removable screw cap conduit housing; Optional 5pin M12 Quick Disconnect Receptacle
- 4-20 mA DC, 2 wire with non-interrupting circuit verification test points
- 0-700 ohms at 24 VDC
- 10-40 VDC (Absolute), 24 VDC Nominal regulated or unregulated
- ± 0.10% of full scale
- ± 0.10% of full scale
- ±0.30% of calibrated range/6 months
