The Remote Display RD.10 can be easily connected to all SONOFLOW sensors. This sensor accessory not only guarantees real-time monitoring of the measured values, but also ensures a clever option to operate the sensor without the need for a PC or PLC. Users can reset the Volume totalizer, zero the sensor, change units of measure, toggle between Celsius and Fahrenheit. The compact housing made of PVC-C fulfills protection class IP65 and allows flexibility in different environments. Can be mounted within 1 meter of the sensor (limited by the length of the M12 to M12 Patch cable provided with each RD.10)
The menu-driven display shows
This 1 meter long Cable connects the Remote Display to the sensor. The cable is a 8 pin M12 (male) to M12 (female). A Patch Cable is shipped with every RD.10 and this accessory is available in case the Patch Cable is misplaced.
The USB Data Converter Cable Type 023 is available as a cable only option in case the cable is misplaced. The 1 meter cable has an 8-pin M12 connector and a standard USB plug implemented in a compact housing with integrated electronics.
This software package connects the sensor to a PC for calibration, setup configuration and monitoring of the data. The C3 Software Package can only be used with V2 sensors. The C3 Software Package with USB Type 023 Data Converter Cable replaces the hardware provided with the USB Type 013 Data Converter package. Ships with C3 software USB stick and Portable USB Data Converter Cable Type 023 (1 meter). The 1 meter cable has an 8-pin M12 connector and a standard USB plug implemented in a compact housing with integrated electronics. This software package is not compatible with Modbus.
This software package connects the sensor to a PC for calibration, setup configuration and monitoring of the data. The C3 Software Package can only be used with V2 sensors and ships with a C3 software USB Stick, USB Data Converter Type 013 with reset button and terminals, USB Cable A-B (2 meter), M12 Cable, 8-pole (2 meter), Switching Power Supply 12VDC. This software package is not compatible with Modbus. An optional Calibration Wizard is available for a nominal charge.
This software package connects the sensor to a PC for calibration, setup configuration and monitoring of the data. The Monitor Software Package can be used with V2 or V3 sensors and is compatible with Modbus. Available with either Type 013 Data Converter (shown) or Type 023 Data Converter Cable.
These cables are used to power and connect all outputs on SONOFLOW sensors. Standard 8 pin M12 to open lead in 1 meter or 5 meter lengths. For connection to PLC/Delta V system.
Provides AC power directly to SONOFLOW sensors. Ships with M12 to a Wall Plug. The sensor can be plugged directly into a wall outlet or into a power bank.
Provides AC power directly to SONOFLOW sensors but adds a IP65 rated momentary push button switch to zero the sensor or reset the volume without connecting to a laptop or controller.
This cable is used to power and connect outputs on the SONOCHECK ABD06 Bubble Sensor. Standard 5 pin M12 to open lead cable in 5 meter length.
The Ethernet/IP Gateway efficiently connects up to twelve (12) SONOFLOW ultrasonic clamp-on or inline flow sensors to a PLC controller in an Ethernet-based system environment. The widely accepted Ethernet/IP protocol allows reliable real-time communication and data exchange between the sensors and the PLC. The Ethernet/IP Gateway offers a number of standard parameters and commands, which can be selected according to the application requirements.